第 46 卷第 5 期 |  | Vol. 46 No. 5 | 2016 年 10 月 | Oct 2016 |
|
所屬欄目:染料、顏料及涂料
有機氟硅改性苯丙乳液的合成及疏水性能 |
牟玉蘭1,2,夏 偉1,鄭大鋒1,曹維良1
(1. 海南科技職業學院,海南 ? 571126;2. 江西理工大學,江西 贛州 341099) |
摘 要:采用連續乳液聚合法合成了有機氟硅改性苯丙乳液,研究了乳化劑、MBFA-12、DB-151用量對乳液穩定性的影響。結果顯示,乳化劑用量為0.8%~1.0%(m/m),m(MBFA-12)∶m(DB-151)=1∶1,用量各為4 g時,合成的氟硅改性苯丙乳液具有良好的穩定性。其涂層與水的接觸角為128.5°,具有超疏水性。合成的氟硅改性苯丙乳液在建筑防水涂料、油水分離等領域中具有一定應用前景。 |
關鍵詞:改性苯丙乳液;有機氟;有機硅;接觸角;疏水性 |
中圖分類號:TQ630.4 文獻標識碼:A 文章編號:1009-9212(2016)05-0030-03 |
|
Styrene-acrylic Emulsion Modified by Organic Fluoride and Silicone and Its Hydrophobic Property |
MOU Yu-lan1,2, XIA Wei1, ZHENG Da-feng1, CAO Wei-liang1
(1. School of Biochemical Chemical Engineering, Hainan Institute of Science and Technology, Haikou 571126, China; 2. Jiangxi university of science and technology, Ganzhou 341099, China) |
Abstract:In order to increase the hydrophobic property of the styrene-acrylic emulsion, styrene-acrylic emulsion modified using organic fluoride and silicone was synthesized through continuous emulsion polymerization. The effect of the loading of emulsifier, MBFA-12 and DB-151 on the emulsion stability was studied. The results showed that, when the amount of emulsifier was 0.8%~1.0%, the usage of both MBFA-12 and DB-151 was 4 g, the average size of the emulsion was smaller while the modified emulsion was more stable. The contact angle between emulsion film and water was 128.5°, showing that the film had super hydrophobility. The modified styrene-acrylic emulsion had promising application in the field of waterproof coating and oil-water separation. |
Key words:modified styrene-acrylic emulsion; organic fluorine; organic silicon; contact angle; hydrophobic property |
|
基金項目:海南省自然科學基金資助(20155202)。
|
作者簡介:牟玉蘭(1985-),女,四川達州人,碩士研究生,講師,主要從事高分子乳液的合成與應用(E-mail:407484467@qq.com)。
|
收稿日期: 2016-09-2
|
|