| 第 35 卷第 2 期 |  | Vol. 35 No. 2 | | 2005 年 4 月 | Apr 2005 |
|
所屬欄目：其它
吸附干燥器的改進與優化設計 |
| 蔣彪; 徐志勇; 陳煥之; 劉志海(湖南海利工程咨詢設計有限公司; 湖南長沙) |
| 摘 要：針對原吸附干燥器存在結構較為復雜、材質浪費過大、內部盤管焊接接頭容易泄漏、設備使用壽命短、使用效果較差等問題,通過將其中的氣體分布改為篩孔板結構、夾套與內筒之間巧妙增加加強圈等方面的改進設計,新的吸附干燥器結構簡單,投資省,運行平穩、安全、可靠、高效,完全達到并滿足生產和工藝要求。 |
| 關鍵詞：一氧化碳; 氯氣; 吸附干燥器; 優化; 改進措施 |
| 中圖分類號：TQ028 文獻標識碼：A 文章編號：1009-9212(2005)02-0059-02 |
|
| Improvement and Optimum Design of Absorption Drier |
| JIANG Biao; XU zhi-yong; CHEN huan-zhi（Hunan Haili Engineering Consultion & Design Co.Ltd; Changsha 410007; China） |
| Abstract：To solve the original absorption drier’s problems, such as constructure’s over-complexity, over-consuming of material, easily leakage of interral coil welding,short life of equipments and bad effctiveness, the following solutions were put forwarded:turning gas distributor into screen opening plate construction and adding a strengthened coil between jacket and inner cylinder. The new absorption drier has many advantages, such as simple constructure, economical consumption, stable operation, safeness, reliabi... |
| Key words：carbon monoxide; chlorine; absorption drier; optimization; improvement |
|
收稿日期：2005-02-26
|
| 閱讀全文 |
|