| 第 36 卷第 4 期 |  | Vol. 36 No. 4 | | 2006 年 8 月 | Aug 2006 |
|
所屬欄目：功能材料
負載型鈮系催化劑載體的選擇、表征與應用研究 |
| 龔慧芳; 彭紅建(湖南工業大學包裝與印刷學院; 中南大學化學化工學院; 湖南株洲; 湖南長沙) |
| 摘 要：對負載型鈮系催化劑載體的選擇進行了研究,選用HZSM-5作為載體效果較佳。采用前沿色譜法、NH3-TPD和CO2-TPD及XRD等多種方法對負載型催化劑進行了表征,能與其催化活性較好地關聯。用于乙酸酯類化合物的合成,單程收率可達93%以上,選擇性為100%。 |
| 關鍵詞：鈮系催化劑; 載體; 表征 |
| 中圖分類號：TQ426.8 文獻標識碼：A 文章編號：1009-9212(2006)04-0040-03 |
|
| Selection,Characterization and Appllication of Carriers for Supported Niobium Series Catalysts |
| GONG Hui-fang1; PENG Hong-jian2 （1. College of Packing and Printing; Hunan University of Technology; Zhuzhou 412008; China; 2. College of Chemistry and Chemical Engineering; Central South University; Changsha 410083; China） |
| Abstract：Selection of carriers for supported niobium series catalyst was systematically studied in this paper. HZSM-5 was the best among carriers of catalyst. This catalyst was characterized by frontal chromatography,NH3-TPD,CO2-TPD and XRD technique,and had a good correlation with its catalytic activity. The single conversion rate and selectivity was above 93% and 100%,respectively,when the catalyst was used to synthesize acetic esters. |
| Key words：niobium series catalyst; carrier; characterization |
|
基金項目：湖南省科技廳資助項目(No.05FB0427)
|
收稿日期：2006-06-01
|
| 閱讀全文 |
|