| 第 37 卷第 4 期 |  | Vol. 37 No. 4 | | 2007 年 8 月 | Aug 2007 |
|
所屬欄目：染料、顏料及涂料
苯乙烯-異戊二烯嵌段聚合物熱熔壓敏膠性能影響因素探討 |
| 張紅星，周曉山
（巴陵石化有限責任公司合成橡膠事業部，湖南 岳陽 414014） |
| 摘 要：用不同種類增粘樹脂、不同牌號苯乙烯-異戊二烯嵌段聚合物（簡稱SIS）制備SIS熱熔壓敏膠，考察不同種類增粘樹脂、不同牌號SIS及萜烯樹脂含量對SIS熱熔壓敏膠性能的影響，結果表明：萜烯樹脂是改性SIS熱熔壓敏膠適宜的增粘樹脂，當萜烯樹脂在SIS熱熔壓敏膠中含量達50%時，SIS熱熔壓敏膠性能較佳，隨不同牌號SIS中兩嵌段SI含量的增加，SIS熱熔壓敏膠的剝離強度有所增加，持粘力有所下降。 |
| 關鍵詞：增粘樹脂；SIS熱熔壓敏膠；萜烯樹脂 |
| 中圖分類號：TQ437 文獻標識碼：B 文章編號：1009-9212（2007）04- 0048-02 |
|
| Study of Influencing Factor on the Properties of SIS Hot- melt Pressure Sensitive Adhesive |
| ZHANG Hong-xing，ZHOU Xiao-shan
（Synthetic Rubber Business Department of Baling Petrochemical Co.，Ltd.，Yueyang 414014，China） |
| Abstract：In this paper，styrene-isoprene-styrene block copolymer（SIS） hot-melt pressure sensitive adhesive（HMPSA） was prepared using different kinds of tackifying resins and SIS. Effects of tackifying resins，SIS and the amount of terpene-resin on the properties of SIS HMPSA were studied. The results showed that terpene-resin was a suitable tackifying resin to modify SIS hot-melt pressure sensitive adhesive. When the content of terpene resin in SIS HMPSA reached to 50%，the properties were better. AS the content of SI diblock in SIS increased，the peeling strength of SIS HMPSA increased，but constant adhesion decreased. |
| Key words：tackifying resin；SIS hot-melt pressure sensitive adhesive；terpene resin |
|
作者簡介：張紅星（1970-1），男，湖南新化人，高級工程師，主要從事高分子材料生產與研究工作。
|
收稿日期：2007-06-04
|
| 閱讀全文 |
|